Table of Contents
Advertisement
Installer Menu
Channels are accessed faster when fixed
modes are used. The AFC (search modes)
should only be used when some channels
are not on nominal frequencies.
NOTE: BAND is automatically set by AUTO
PROGRAM.
If some channels were not found by AUTO
PROGRAM, select the appropriate AFC
setting here and add the channels using the
ADD/DEL option in the Setup Menu.
4-I. STRT CHANNEL (Start Channel)
When active, this function allows you to
determine the initial channel number when
the TV is turned ON. This feature is useful
for an in-house information channel, since
the TV would always select that channel
when it is turned on. Setting this to 255
causes the last channel viewed when TV
was turned off to be the tuned to channel
when the TV is turned on again.
The range of values is 0 - 255. Use ADJ
(adjust) keys to choose numbers that
determine the start channel.
5-I. CHAN LOCK (Channel Lock)
CHAN LOCK is ideal if a cable box (or
similar) is the sole source for
programming—and the TV must always be
on the same channel.
Changing channels with Channel Up/Down
or keypad numbers is impossible. Channel
Lock is inactive when set to 0 (default).
Generally, this feature is used in conjunction
with START CHANNEL (item 4-I.) where the
start channel may, for example, be set to 3
or 4. If the start channel is 3, then the TV
will remain on channel 3. NOTE: When
CHANNEL LOCK is active and CHANNEL
OVERIDE is disabled, AUTO PROGRAM is
not functional.
6-I. GHOST CH (Ghost Channel)
When set to 1, the current channel number
is displayed in the upper right corner of the
picture. The number moves slightly to
prevent
damage to the screen. The default is "0" or
OFF. NOTE: When captions are on, "Ghost
Channel" is not displayed.
Page 42
7-I. START VOLUME
This function allows the Installer to
determine the initial volume level setting
when the TV is turned ON. This feature is
useful for an in-house information channel,
since the TV would always select that
Volume level when it is turned on. The
range of values are 0 - 63, 255. If 255 is
selected, the current volume level will be
retained in memory when the TV is turned
off; at TV turn on, Volume level is
automatically set to the previous or last
level.
8-I. MIN VOLUME (Minimum Volume)
This function determines the minimum
volume level allowable with the VOLUME
(VOL) Up/Down control. In this way, for
example, someone cannot set the sound
too low to hear. The range is from 0 to 63
change values with ADJ (adjust). The
factory default is 0, which provides full
range of volume control. It may be best to
set the same value on every TV.
NOTE: The minimum volume level cannot
have a value setting higher than in the MAX
VOLUME level (described below).
9-I. MAX VOLUME (Maximum Volume)
This function determines the maximum
volume level allowable with the VOLUME
Up/Down control. In this way, for example,
someone cannot set the sound level high
enough to disturb others.
The range is 0 to 63, with 63 as the default
which gives the user the full range of
volume control. Change values with ADJ
Left/Right keys. It may be best to set the
same value on every TV.
NOTE: The maximum volume level cannot
have a value setting lower than the MIN
VOLUME level (described above).
10-I. MUTE DISABLE
Enables or disables sound mute function. If
set to 1, sound cannot be muted. If set to 0,
sound can be muted.
11-I. KEY DEFEAT
It enables or disables the menu key from
front panel keyboard.
12-I. NOT USED
Advertisement
Table of Contents
