Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Service Manual
I n s t a l l a t i o n
a n d
O p e r a t i n g
G u i d e
W a r r a n t y
M o d e l N u m b e r
R U - 2 7 F B 3 0 C
R U - 2 7 F B 3 1 C
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote this
information to your dealer when you require service.
t a b l e
o f
c o n t e n t s
p a g e 5
Internet Home Page : http://www.lgcommercial.com
P/N : 3828VA0524A b (FCN Chassis)
Advertisement
Table of Contents
Related Manuals for LG RU-27FB30C
Summary of Contents for LG RU-27FB30C
- Page 1 I n s t a l l a t i o n a n d O p e r a t i n g G u i d e W a r r a n t y M o d e l N u m b e r R U - 2 7 F B 3 0 C R U - 2 7 F B 3 1 C Please read this manual carefully before operating your set.
-
Page 2: Safety Warnings
• Consult the dealer or an experienced radio/TV technician for help. CAUTION: Do not attempt to modify this product in any way without written authorization from LG Electronics Corporation. Unauthorized modification could void the user’s authority to operate this product. -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Important safeguards for you and your new product. Your product has been manufactured and tested with safety in mind. However, improper use can result in potential electrical shock or fire hazards. To avoid defeating the safeguards that have been built into the new product, please read and observe the following safety points when installing and using the new product, and save them for future reference. - Page 4 IMPORTANT SAFETY INSTRUCTIONS (Continued from previous page) Example of Grounding According to National Electrical Code Instructions Ground Clamp Electric Service Equipment NEC - National Electrical Code 15. Lightning For added protection for this product (receiver) during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.
-
Page 5: Table Of Contents
Clone Programmer—both are shown and described in later sections. The installer remote allows access to the Installer and User menus. The LT2000 Quickset II Clone Programmer is used to duplicate a LG TV’s setup and install it on another identical LG TV. See your LG Dealer. -
Page 6: Sc652Lg User Remote Control
SC652LG User Remote Control A list of the keys on the SC652LG user’s remote supplied with the TV and their functions. POWER Turns TV On or Off CC (CLOSED CAPTIONING) Press to access closed options. Press ENTER to exit.. VOLUME DOWN/UP Adjusts the sound level. -
Page 7: Optional Lp702 Installer's Remote Control
ENTER to go to the new channel. ALARM Press to go to the Alarm menu. Set a time for the TV to turn itself on. CHANNEL PREVIEW Gives installer access to the Guest’s menus. Displays the available TV channels and hotel guest’s Parental... -
Page 8: Connections/Installation Overview
SDTV Set top Box, 480i ANTENNA/CABLE Use to hookup your antenna or cable system. M.P.I. PORT Use with Clone Programmer Page 8 Typical TV Back Antenna Cable M.P.I. S-VIDEO IN R-L AUDIO IN Connect S-Video equipment to these jacks. VIDEO IN R-L AUDIO IN... -
Page 9: Hookup Directory
If you want to hook up a component video device ......page 15 Send the TV sound to an external audio system or monaural speaker ..page 16... -
Page 10: Antenna
If you have a 75 ohm RF cable, then you don’t need any adapters! A 300 to 75 ohm adapter is not included with the LG TV. Mini Glossary The wire that comes from an off-air antenna or cable service provider. Each end looks... -
Page 11: Cable Service
Remove the back of the remote and install two AA batteries. Plug in the TV. The TV is designed to operate on standard current, 120-volt 60 Hertz AC. Do not attempt to operate it on DC Current. -
Page 12: Antenna With Vcr
Hook Up Over-The-Air Antenna and VCR Connect your off-air antenna and VCR to the TV. Locate the Antenna/Cable (In) jack on the back of the VCR. Connect the wire that runs from the antenna directly to this jack, according to one of the connection diagrams shown to the right. -
Page 13: Cable Service With Vcr
Hook Up Cable Service (CATV) and VCR Connect a VCR and Cable service to the TV. Locate the Antenna/Cable (In) jack on the back of the VCR. Connect the CATV cable that runs from the wall directly to this jack, according to one of the connection diagrams shown at right. - Page 14 Hook Up S-Video VCR/DVD Player Your LG TV may be connected to a Super-VHS VCR or DVD player through the S-Video Input located on the TV’s connection panel. Use the TV’s S-Video In jack to connect other S-Video type equipment. To use this equipment you must use the optional LP702 remote...
-
Page 15: Component Video
Hook Up Component Video The LG TV may be connected to a Component Video device like a DVD player or other component video source. To use this equipment you must use the optional LP702 remote control, refer to the Source menu on page 20. - Page 16 External Monoaural Speaker Hook Up Send the sound from the TV to an external speaker. To use this hook up, see your external amplifier instruction manual. Audio Output: Use the Matrix Out jack to connect an external monoaural speaker or amplifier to the TV.
- Page 17 Service incoming signal source and automatically store all of the channels found by the channel search in non-volatile memory. With the optional LP702 Installer’s remote control in hand, press POWER to turn the TV on. Press MENU repeatedly until the Setup menu appears.
-
Page 18: Front Panel Controls/Source Inputs
If you have a device connected to the front Video or S-Video jack and the Auto sense source connection is turned on, you will not be able to change channels using the TV tuner until you have disconnected the device. -
Page 19: Picture/Sound Source Selection
Auto Sense source connections override all other sources. The front Video and S- Video In jacks are Auto Sense source connections. If you have devices connected to these jacks, you will not be able to change channels using the TV tuner until you have disconnected those devices. -
Page 20: Source Menu
• If a source is not available, a message indicating this is a displayed. Mini Glossary SOURCE: Input(s) providing the picture and sound to the TV. AUTO SENSE SOURCE: Input(s) that the TV automatically switches to when connected. Page 20 SOURCE MENU ANTENNA/CABLE... -
Page 21: On-Screen Menus/Displays Overview
Turns selected Caption/Text option On and Off; press CC to activate. Sets the time the TV will turn off. Shows the current channel number in red scrolling down the screen. Refer to Installer menu to turn off. Sets a time for the TV to automatically turn itself on. Page 21... -
Page 22: Sleep Timer Menu
XDS info if available on program. SLEEP TIMER PRESS TIMER Sleep Timer Menu Press TIMER. Shows remaining time before TV turns off. Set a preset turn-off time from 10 minutes up to 4 hours. ALARM MENU TIME NOW 3:11 PM... -
Page 23: Setup Menu (Starts With Page 18, Auto Program)
Setting Add/Delete/ Blank Channels Fine-tune the channel selection Press the MENU key on the Installer’s remote so the Setup menu appears. Press SELECT repeatedly to highlight the Add/Del/Blnk option. Using either the NUMBER keypad and ENTER or the Channel Up/Down arrow on the remote, select a channel. -
Page 24: Channel Labels (Preset And Custom)
Setting Preset Channel Labels Selecting channel names from the preset Channel Labels (See the next page to create your own custom channel labels). Using either the NUMBER keypad or the Channel Up/Down arrows on the optional Installer’s remote, select a channel. Press MENU repeatedly on the optional LP702 Installer’s remote until the Setup menu appears. -
Page 25: Creating Your Own Channel Labels
Creating Your Own Channel Labels Overview Channel Labels help the user identify the channel or network being viewed. In the Setup menu with the CH LABELS option highlighted, use the Adjust Left/Right arrow to scroll through the available channel labels, such as, A&E, AMC, ESPN, HBO, etc. -
Page 26: Source Name
Source Name This menu allows the user to rename the source names. Press MENU repeatedly on the optional LP702 Installer’s remote until the Source menu appears. Choose the Source Name using SELECT. Press ENTER, or the Left/Right ADJ arrow to go to the Source Name. -
Page 27: Clock Setup (Auto/Manual)
Settings add 1200. For example, to set 6:30 p.m., add 1200 to 630, = enter 1830. For Auto Clock Set to work, the TV must be tuned to a local PBS station. If the TV does not set the time, set the clock time manually. -
Page 28: Timer Setup (On/Off Timers)
The clock must be set before the Timers will function. The Off Timer can be used to turn the TV off at the preset time. Note: The On Timer does not have to be set to use the Off Timer feature. -
Page 29: Captions (Caption/Text Setup)
Mini Glossary CAPTIONS: The term for the words that scroll across the bottom of your TV screen; usually the audio portion of the program provided for the hearing impaired. TEXT: The term for the words that appear in a large black frame and almost cover the entire screen;... -
Page 30: Tilt
Use SELECT on the remote control, to highlight the Tilt option on your screen. Use the Left/Right ADJ arrow to adjust the tilt. Press ENTER to return to TV viewing. Page 30 SETUP MENU AUTO PROGRAM ADD/DEL/BLNK CH. LABELS... -
Page 31: Degauss
Use the Left/Right ADJ arrow to select ON or OFF. After the degaussing function works, ON mode switches to OFF mode automatically. Press ENTER to return to TV viewing. Notes: Do not operate this function often because the life of the picture tube may be shortened. -
Page 32: Language
Language option on your screen. Use the Left/Right ADJ arrow to choose one of the following options: English, Spanish (Español) or French (Francais). Press ENTER to return to TV viewing. Page 32 SETUP MENU AUTO PROGRAM ADD/DEL/BLNK CH. LABELS... -
Page 33: Audio Menu
Audio Menu Set up the audio menu options for the end user. On the optional LP702 Installer’s remote, press MENU repeatedly until the Audio menu appears. Using SELECT on the remote control, highlight the audio option you want to change. Choose from: •... -
Page 34: Video Menu
• Brightness: Increases or decreases amount of white in the TV picture. • Color: Adjusts levels of all colors in the TV picture. • Tint: Adjusts the relative amounts of red and green in the picture. -
Page 35: Parental Control Menu
Parental Control offers the user a wide variety of options and settings that restrict or “block” the programming that can appear on the TV. Parental control allows the user the capability of defining which program rating they consider acceptable, to the younger or more sensitive viewer. - Page 36 NC-17 Restricted Viewing Hard Core Films Note: LG Electronics Corporation is not liable for any program content that appears when using this rating system; as always, user discretion is advised. Page 36 Even if you choose to leave the Aux...
- Page 37 Use SELECT, and the Left/Right ADJ arrows to select and adjust or set the rating for an option. For Sex Scenes for example, use the “From TV-PG” setting. (See the Mini Glossary, Ratings Charts on this and the previous page for rating definitions).
- Page 38 Reset Parental Control Block Hours to Zero and Cancel Password This provides the institution staff and the installer a means to reset the TV to normal operation, if a user has either forgotten the password or has left Parental Control Block active.
-
Page 39: Installer Menus
When set to 1, cannot tune from current channel. Set to 1 to enable Ghost Channel display. Volume level at TV turn-on (Set 255 to retain last volume level). Set to 1 to disable mute function. Set to 1 to disable the front panel keyboard menu key Puts On-Off in Ch Up/Down sequence. -
Page 40: Installer Menu
Time display, (foreground color = background color and custom color enabled) a large channel number is displayed instead of the normal Channel-Time display. When set to 1 and loss of M.P.I. communication occurs, TV tunes to Channel 0. menu. list. -
Page 41: Remote Control
TV will remain on, unless there has been activity from either the control panel or remote control. *M.P.I. Multiple Protocol Input: LG protocol for remote control of TV through RJ11 (M.P.I.) jack on TV connections panel. Default Value Brief Description of Function and Comments When set to 1, XDS display program information will not appear. - Page 42 START CHANNEL (item 4-I.) where the start channel may, for example, be set to 3 or 4. If the start channel is 3, then the TV will remain on channel 3. NOTE: When CHANNEL LOCK is active and CHANNEL OVERIDE is disabled, AUTO PROGRAM is not functional.
- Page 43 (Parental Control) block hours. Default setup is 12 blocking hours. 23-I. CAPTION LOCK Set to 1 to restore previous Caption On/Off state after TV turns off. When set to 0, Captions are always off, when TV is initially turned on. 24-I. TEXT MODE...
- Page 44 Installer Menu Typical Edit Channel Labels on-screen menus. 33-I. Y/C LOOPOUT Set to 1 to enable S-Video loopout. Set to 0 to disable S-Video loopout. 34-I. CAMPORT ENABLE Set to 1 to enable the front AUX (Camport) input. Set to 0 to disable front AUX input. 35-I.
- Page 45 Channel-Time display. 7 = White 75-I. REVERT CH When set to 1 and loss of M.P.I. communication occurs, TV automatically tunes to the specified Start Channel. 76-I. DEFEAT XDS Set to 1 to disable XDS display. Set to 0 to enable XDS display.
-
Page 46: Installer Menus
Installer Menu 83-I. HANDSHK TIME Adds an additional delay to the handshake time which is 64 msec, thus relaxing M.P.I. timing requirements to be compatible with PC based Windows controlled systems, range is 0 - 5. Set to 0 to retain standard 64 msec delay. -
Page 47: Lt2000 Quickset Ii Clone Programmer
Once learned from the master, setup data is retained in the LT2000 for future use. When using the LT2000, cloning operations will go easier if the TV set is connected to a good quality signal and operating with a stable picture displayed. To operate the LT2000, use the indicated keys on an HP602, LP702, or MBR3447LG remote, or the front panel keys on the TV receiver. - Page 48 TV to “teach” it the setup. A slow flashing green light indicates there is a problem with the communications between the TV and the programmer. In this case, check for a damaged cable, poor contacts, or other connection troubles.
- Page 49 CHANNEL KEYS OR DIGITS. Since the Clone Programmer’s time cannot be set directly, the time needs to be copied from an LG TV equipped with M.P.I. Input capability. Once the time is copied to the Clone programmer, the current time can then be transferred to another TV.
-
Page 50: Clone Selection Menu Choices
New Setup not present. When cloning operations are complete, just unplug the LT2000 from the TV. If the TV does not display a picture (blank screen) after a few seconds, just change channels. Page 50 The LT2000 programmer is designed to be used with TVs containing the 221-01006 and later processors. -
Page 51: Troubleshooting
Try a different power outlet. Local power failure? Turn source equipment on. Select source. Press TV/FM to put remote into TV mode. Wait until software function is complete. Point remote at TV Front Control Panel. Move remote closer to TV or darken room. - Page 52 The following may cause image problems or distortion: Electrical appliances, powerful lights, cars, trucks; computers or portable phones; medical equipment. If possible increase the distance between the TV and the offending appliance. Or shut one of them off. Try a different channel.
- Page 53 Troubleshooting Symptoms Possible Cause(s) Source Selection / Source Image Problems Camport (front • Equipment not connected. Audio/Video) source not selectable. No Camport image. • Equipment not turned on. (front Video) S-Video Source not • Camport (front Video) selectable. connected. • Not connected. No S-Video image.
-
Page 54: Maintenance
Maintenance Routine TV cabinet and screen cleaning Careful and regular cleaning can extend the the useful service life of the TV. Be sure to turn the power off and pull out the power cord before you begin any cleaning. Screen Cleaning... -
Page 55: Glossary
Mono (m onaural) s ound is one channel of s ound. On m ore than one M ONO SOUND s peaker, all the s peakers play the s am e audio. Multiple Protocol Interface: LG protocol for external control of TV M .P.I. through RJ11 (M.P.I.) input jack on TV connections panel. -
Page 56: Warranty
Direct-View Welcome to the LG family! We believe that you will be pleased with your new TV. Color TV Please read this warranty carefully, it is a “LIMITED WARRANTY” as defined under Federal Law. This warranty gives you specific legal rights, and you may also have other rights that vary from state-to-state within the U.S.A.