Decommisioning And Disposal; Troubleshooting - Baelz Automatic 373-E07 Operating Instructions Manual

Motorized Linear Actuator

9. DECOMMISIONING AND DISPOSAL

Dispose of the digital positioner in accordance with the relevant, country-specific regulations
and laws..

10. TROUBLESHOOTING

If the actuator does not work properly, proceed as follows to correct the problem:
1. Check that the actuator is correctly installed.
2. Check the actuator settings and the specifications on the nameplate.
3. Correct the problems as specified in the checklist (page 35).
4. If the problem cannot be corrected, contact the Baelz service department.
5. If, despite consultation, the issue still cannot be resolved, the device can be returned to
Baelz for repair / replacement by arrangement with the service department.
W. Baelz & Sohn GmbH & Co. · Koepffstrasse 5 · 74076 Heilbronn · Germany · www.baelz.de
Please give the following information when
contacting the manufacturer or sending the device
in for repair:
● Serial number
● Type name
● Supply voltage and frequency
● Extras fitted
● Error report
baelz 373-E07
Seite | Page 34 | 36