Safety; Intended Use; Instructions For The Operator - Baelz Automatic 373-E07 Operating Instructions Manual

Motorized linear actuator
Table of Contents

Advertisement

Motorized Linear Actuator

1. SAFETY

Read these operating instructions, in particular the following safety instructions, carefully
before installation and operation.
Beware
Potentially hazardous situation that could result in minor injury.
Beware
Also indicates a hazard that may result in property damage.
Caution
Potentially harmful situation in which the product or an object in its
Caution
vicinity may be damaged.
Danger
Imminent danger of death or serious injury.
Danger
Warning
Potentially hazardous situation that may result in death or serious injury.
Warning
Tip:
Application instructions and other useful information.

1.1 Intended use

Baelz 373-E07 motorized linear actuators are controlled by three-point control or constant
control in combination the digital positioner baelz 7020. The linear actuators of the series
described in this document are intended for the stroke adjustment of valves.
To ensure their intended use, make sure that the above type identification complies with
the nameplate of the linear actuators before starting any activities. The actual technical
specifications of the linear actuators and the power supply requirements are the specifications
indicated on the nameplate.
Any use other than the intended use mentioned above, different tasks, and operation with other
power sources than those permitted, is considered to be improper use. In case of improper
use, the operator shall be solely liable for the risk presented to persons and the device as well
as other property!
Intended use also includes compliance with accident prevention and DIN VDE regulations as
well as safe working practices for all measures described in these operating instructions, taking
into account the usual technical regulations.

1.2 Instructions for the operator

Always keep the operating instructions available at the place where the actuator is used!
During installation, operation and maintenance, observe the applicable occupational safety,
accident prevention and DIN VDE regulations. If necessary, observe additional regional, local
or internal safety regulations.
Make sure that every person entrusted with one of the measures described in these operating
instructions has read and understood these instructions.
W. Baelz & Sohn GmbH & Co. · Koepffstrasse 5 · 74076 Heilbronn · Germany · www.baelz.de
baelz 373-E07
Seite | Page
4 |
36

Advertisement

Table of Contents
loading

Table of Contents