HP ProLiant DL345 Gen10 Plus Maintenance And Service Manual page 106

12. Install the processor:
a. Hold the processor by its carrier handle and slide the processor into the rail frame until it engages with a click sound.
b. Remove the pin field cover cap.
CAUTION: CAUTION:
To prevent the risk of damaging the pins in the processor socket, do not reinstall the pin field cover cap after
removing it.
c. Hold the lift tabs near the front end of the rail frame, and then pivot the rail frame to the closed position.
A click sound indicates that the rail frame is properly engaged.
13. Close the force frame.
CAUTION: CAUTION:
Removing and replacing a processor 106