HP ProLiant DL345 Gen10 Plus Maintenance And Service Manual page 5

3.28 Removing and replacing an accelerator
3.29 Removing and replacing the LFF bezel ear
3.30 Removing and replacing the SFF front I/O module
3.31 Removing and replacing the bezel ear
3.32 Removing and replacing the chassis intrusion detection switch
3.33 Removing and replacing the OCP NIC 3.0 adapter
3.34 Removing and replacing the serial port
3.35 System battery replacement
3.35.1 System battery information
3.35.2 Replace the system battery
3.36 Removing and replacing the system board
3.36.1 Removing the system board
3.36.2 Replacing the system board
3.36.3 Re-entering the server serial number and product ID
3.37 HPE Trusted Platform Module 2.0 Gen10 Plus option
4 Troubleshooting
4.1 NMI functionality
4.2 Troubleshooting resources
5 Diagnostic tools
5.1 Product QuickSpecs
5.2 UEFI System Utilities
5.2.1 Selecting the boot mode
5.2.2 Secure Boot
5.2.3 Launching the Embedded UEFI Shell
5.3 iLO Service Port
5.4 Intelligent Provisioning
5.4.1 Intelligent Provisioning operation
5.5 HPE Insight Remote Support
5.6 HPE InfoSight for servers
5.7 USB support
5.7.1 External USB functionality
5.8 HPE Smart Storage Administrator
5.9 HPE MR Storage Administrator
5.10 StorCLI
6 Component identification
6.1 Front panel components
6.2 Front panel LEDs and buttons
6.2.1 Server UID LED
6.2.2 Using the UID button to view the Server Health Summary
6.2.3 Front panel LED power fault codes
6.3 Rear panel components
6.4 Rear panel LEDs
6.5 System board components
6.5.1 System maintenance switch descriptions