Removing And Replacing A Dimm - HP ProLiant DL345 Gen10 Plus Maintenance And Service Manual

Removing and replacing a DIMM

Removing and replacing a DIMM
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
4. Remove the access panel .
5. Remove the air baffle .
6. Remove the DIMM.
To replace the component, reverse the removal procedure.
For DIMM configuration information, see the server user guide.
Removing and replacing a DIMM 101