Changing Admin Password And Adding A Shared Folder - Buffalo LinkStation 420DS User Manual

7
Power Connector
Use the included power cable to connect to a surge protector or outlet.
8
Anti-Theft Security Slot
Use this slot to secure your LinkStation with a cable lock (not included).
9
LAN Port
Connect to a router, hub, or switch on your Ethernet network with the included Ethernet cable.
10
Hook
To secure the power cable, insert it into the slot as shown.
11
Disk 1 Error LED
If there is a hard drive error on drive 1, this LED will light.
12
Disk 2 Error LED
If there is a hard drive error on drive 2, this LED will light.
13
Link and Activity LED
This LED shows network activity. It blinks green when the LinkStation is accessed over the network.
14
Not in use.

Changing Admin Password and Adding a Shared Folder

After initial setup, changing your password and creating other shared folders are recommended.
1
Double-click the
2
Right-click on your LinkStation's icon and select Settings. On the Mac, select the LinkStation's icon while
holding down the control key, then select Settings.
icon to start NAS Navigator2.
6