Table of Contents
Advertisement
If an NTP server is specified by name instead of IP address, make sure that a DNS server is configured for the
LinkStation.
Note: The internal clocks of the LinkStation and other devices on your network may run at slightly different
speeds. Over a long period of time your network devices may show somewhat different times, which can cause
network problems. If clocks on your network vary by more than 5 minutes it may cause unexpected behavior.
For best results, keep all clocks on the network set to the same time by adjusting them regularly, or use an NTP
server to correct them all automatically.
6
Click the Language tab. Select the language to be used in the Windows client, then click OK.
Note: This tab changes the language used by the LinkStation for email notification and other functions. To
change the language displayed in Settings, go to Advanced Settings or Easy Admin and click Language in the
menu bar. Choose your desired language from the drop-down menu.
Jumbo Frames
If your other network devices support it, you may be able to increase network performance with jumbo frames.
1
In Advanced Settings, click Network.
2
Click
to the right of "IP Address".
3
Click the LAN port where the jumbo frames will be used.
4
Click Edit.
62
Advertisement
Table of Contents
