Changing The Ip Address - Buffalo LinkStation 420DS User Manual

5
Select your desired Ethernet frame size and click OK.

Changing the IP Address

Normally, the LinkStation's IP address is set automatically from a DHCP server on your network. If you prefer, you can
set it manually. An easy way to do this is to change it from NAS Navigator2 running on a computer connected to the
same router (subnet) as the LinkStation. The procedure to change the IP address in Settings is below.
1
In Advanced Settings, click Network.
2
Click to the right of "IP Address".
3
Select the LAN port.
4
Click Edit.
63