Changing Raid Mode - Buffalo LinkStation 420DS User Manual

2
Click to the right of "RAID".
3
Click the array to delete.
4
Click Delete RAID Array.
5
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.
Once JBOD is configured, create shared folders on each drive to use them.

Changing RAID Mode

To change the RAID mode, first put the drives in JBOD.
1
In Advanced Settings, click Drives.
2
Click to the right of "RAID".
3
Click the array to delete. If the "RAID Mode" is blank, the array is already in JBOD. Proceed to step 7.
4
Click Delete RAID Array.
5
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.
6
Click OK.
25