Copying From A Usb Device - Buffalo LinkStation 420DS User Manual

Note: If access restrictions are not configured on the target share, log in with the administrator account. The
default username and password for the administrator account are "admin" and "password". If access restrictions
are configured, log in with an account with write privileges.
21
Time Machine will count down from 120 seconds and the backup will begin.

Copying from a USB Device

Use Direct Copy to copy from a USB device directly to the LinkStation.
These devices are supported:
• USB mass storage devices
• Card readers (except for card readers that can recognize two or more memory cards)
• Digital cameras and other PTP devices
• UPS devices that are specifically indicated as compatible
• USB printers
These devices are not supported:
• USB hubs
• Mice
• Keyboards
1
In Advanced Settings, click Backup.
2
Move the Direct Copy switch to the
To change the Direct Copy target folder, navigate to Backup - Direct Copy - Edit, select a new folder, and click
OK.
3
Connect the USB device. When it mounts (about 10 seconds), the function LED will light up.
position to enable Direct Copy.
50