Buffalo LinkStation 420DS User Manual page 52

Note: Devices that don't trigger the function LED to light up are not supported.
4
You now have 60 seconds to press the function button once. If you do, the function LED will flash as all the files
on the USB device are copied to the Direct Copy folder of the LinkStation.
Notes:
• While the function LED is flashing, hold the function button down for 3 seconds to cancel Direct Copy.
• For digital cameras that are not in the USB mass storage class, all files from the digital camera are copied.
• To change the Direct Copy target folder, navigate to Backup - Direct Copy - Edit, select a new folder, and click
OK.
5
When the copy operation is finished, the access LED of the USB device will stop flashing. Hold down the
function button for 8 seconds. The function LED will flash as all external drives are dismounted, which will take
about 30 seconds. When the dismount is finished, the function LED will stop flashing and glow steadily. You
now have 60 seconds to unplug any USB drives safely.
51