Table of Contents
Advertisement
4
Select "Workgroup" and click Next.
5
If a prompt appears, click Yes.
6
Enter a workgroup name. Select "Assign authorization to external SMB server" and enter the authentication
server's IP address (recommended) or name. Check "Automatic user registration" and "Use shared folder for
authorization testing". Enter the shared folder name for authorization testing and click OK.
7
A shared folder for authentication has been created on the LinkStation. Users registered to the specified
authentication server are automatically registered as users on the LinkStation when they open the shared
folder for authentication. You can also register users directly. Connect to the authentication folder via SMB, not
FTP or AFP.
8
Click
to the right of "Folder Setup".
9
Click a shared folder to set access restrictions on.
10
Click Edit.
22
Advertisement
Table of Contents
