Chapter 1 Getting Started; Diagrams - Buffalo LinkStation 420DS User Manual

Chapter 1 Getting Started

Diagrams

LS420DS
3
1
Power LED
The white power LED will light up while the LinkStation is on.
The white power LED blinks while booting or shutting down.
The red power LED blinks when an error occurs.
If there is a status message, the power LED blinks amber.
If there is a new firmware available, the power LED glows amber.
2
Function LED
This LED glows while the LinkStation is being initialized and while dismounting USB devices.
3
Function Button
Use this button for Direct Copy, dismounting USB devices, and initializing settings.
4
Fan
Do not block the fan.
5
Power Switch
Move the switch up and down to power on and off.
6
USB 2.0 Port
Compatible Buffalo USB hard drives, USB flash drives, digital cameras, USB UPS connection, and USB printers
can be connected. USB hubs are not supported.
DISK 2
DISK 1
1
2
ERROR
DISK 1
DISK 2
11
ERROR
DISK 1 12
DISK 2
9
5
4
5
6
7
13
14
10
8