Additional Information
Wall Mount (Optional)
Notes:
• Check for reception strength and camera angle before drilling the holes.
• The types of screws and anchors you need depend on the composition of the
wall. You may need to purchase the screws and anchors separately to mount your
camera units.
1. Place the wall mount bracket on a wall and then use a pencil to mark two holes in
parallel. Remove the wall mount bracket and drill two holes in the wall (7/32 inch
drill bit).
2. If you drill the holes into a stud, go to step 3.
• If you drill the holes into an object other than a stud, insert the wall anchors into
the holes. Tap gently on the ends with a hammer until the wall anchors are flush
with the wall.
32