Panasonic KX-TG6072C Operating Instructions Manual page 48

TG6072C_6073C(e).book Page 48 Thursday, February 1, 2007 2:14 PM
Useful Information
Call Display
Problem
The handset does not
display the caller's name
and/or phone number.
The handset or base unit
does not announce the
displayed caller names or
phone numbers.
I cannot dial the phone
number edited in the caller
list.
48
Cause/solution
L You have not subscribed to Call Display service.
Contact your telephone service provider to
subscribe.
L If your unit is connected to any additional
telephone equipment such as a Call Display box
or cordless telephone line jack, disconnect the
unit from the equipment and plug the unit
directly into the wall jack.
L If your unit is connected to a telephone line with
DSL service, we recommend connecting a noise
filter between the base unit and the telephone
line jack. Contact your DSL provider for details.
L The name display service may not be available
in some areas. Contact your telephone service
provider for details.
L Other telephone equipment may be interfering
with this unit. Disconnect the other equipment
and try again.
L The caller requested not to send caller
information (page 22).
L Generally, caller information is displayed from
the 2nd ring.
L The handset or base unit's ringer volume is
turned off. Adjust it (page 16, 29).
L The Talking Call Display feature is turned off.
Turn it on (page 29).
L The ring count for the answering system is set to
"2" or "Toll saver". Select a different setting
(page 35).
L If the base unit and another handset are having
an intercom call, your handset does not
announce caller information.
L The phone number you dialed might have an
incorrectly edited pattern (for example, the long
distance "1" or the area code is missing). Edit
the phone number with another pattern (page
25).