HOMCOM 820-335V90WT Instruction Manual page 16

If the temperature sensor is not functioning properly, you will see the symbol below.
Please contact the manufacturer or its service agent.
Set the desired
temperature
Press the arrows to set the
desired temperature.
Day/night thermostat – Instructions
Tip! The thermostat can be used as a regular electronic
thermostat (i.e. the heater will maintain a constant
temperature 24 hours a day). Please see the section on the
electronic thermostat for further information
1) Daytime setback
When you want to reduce the
temperature during the day (set for
weekdays from now on) press
display shows .
Use the arrows to enter the correct
weekday. (Monday = 1, Tuesday = 2,
Wednesday = 3, Thursday = 4, Friday =
5, Saturday= 6 and Sunday = 7). Save
by pressing .
Enter the desired temperature for
daytime settings. Save by pressing
Enter the desired number of hours for
daytime settings. Save by pressing
*Control light is green when the
heater is active. The control light is red
when the heater is inactive but has
been programmed.
. The
.
.
16