Default Setting Changes - Toshiba G7 Operation Manual

Default Setting Changes

To change a default parameter setting, go to the Program mode by pressing the MON/ PRG key until the
Program menu is displayed. Turn the Rotary Encoder until the desired parameter group is within the
cursor block and press the Rotary Encoder (repeat if there is a submenu).
Press the Rotary Encoder to select the default setting to be changed and the selection takes on the reverse
video format (dark background, light text). Turn the Rotary Encoder to change the value of the
parameter. Press the Esc key before accepting the change to exit the menu without saving the change or
press the Rotary Encoder to accept the new setting.
For a complete listing of the Program mode menu options, see the section titled Program Mode on pg. 36.
Menu items are listed and mapped for convenience.
The default settings may also be changed by entering the Parameter Number of the setting to be changed
at the Direct Access menu (Program ⇒ Direct Access ⇒ Parameter Number).
A listing of all parameters that have been changed from the default setting may be viewed sequentially by
accessing the Changed From Default screen (Program ⇒ Changed From Default).
Note: Parameter F201 was changed to create the example shown in Figure 18.
The Changed From Default feature allows the user to view (or change) the parameters that are different
from the default or the post-reset settings. Once the Changed From Default screen is displayed, the
system automatically scrolls through all of the system parameters and halts once reaching a changed
parameter.
The Rotary Encoder may be clicked once clockwise to continue scrolling forward or clicked once
counterclockwise to begin scrolling in reverse. With each click of the Rotary Encoder the system scrolls
and stops at the next parameter that has been changed.
Pressing the Rotary Encoder while a changed parameter is displayed accesses the settings of the changed
parameter for viewing or changing. Pressing Esc when done returns the user to the Changed From
Default screen.
Figure 18. Changed From Default screen.
28 G7 ASD Operation Manual