Table of Contents
Advertisement
Always check every time
before use!
• The personal protective equipment
(PPE) may no longer be used even in
the case of very minor faults, or if there
is any doubt about safe use.
• Faulty PPE components may only be
tested or repaired by BORNACK or in a
workshop authorised in writing by
BORNACK.
• Regular inspections are essential
because the safety of the user depends
on the efficiency and durability of the
PPE.
• The user must have completely read
and understood the User Manual
before use.
INFORMATION BEFORE USE
VISUAL INSPECTION
• Tape energy absorber complete and
flawless.
• Safety seams of the tape energy
absorber are undamaged.
• Co n n e c t o r s ( o p t i o n a l ) w i t h o u t
damage.
• Product identification legible.
• The last inspection by an expert was
carried out within the past 12 months.
ATTENTION:
The tape energy absorber must be
immediately withdrawn from use after
a fall load. An expert decides about the
re-release according to DGUV Principle
312-906 after an in-depth inspection
based on their technical expertise. Only
use with the written approval of the
expert.
FUNCTION TEST
• Fasteners of the connectors (optional)
and their locks are functional.
6 | 7
Advertisement
Table of Contents
