Installing Crossbar Cable (Optical) - Fujitsu M10 Product Notes

in the arrow direction to remove it. At this time, do not pull out the crossbar
cable by holding the cable part. If you pull the cable part, the connector is not
unlocked completely, which may cause a damage.
2.
Remove two crossbar cables (optical) on the other side from the crossbar
box.
Hold the tab (A in the figure) of the crossbar cable (optical), and pull it straight
in the arrow direction to remove it. At this time, do not pull out the crossbar
cable by holding the cable part. If you pull the cable part, the connector is not
unlocked completely, which may cause a damage.

Installing Crossbar Cable (Optical)

1.
Connect two crossbar cables (optical) each to SPARC M10-4S and the
crossbar box.
There are two types of crossbar cables (optical). Connect cables of a same type to
a same port number. Cables can be distinguished by tab shape. For tab shape,
see Figure 8-7.
Figure 8-35
Number in figure
1
Hold the connector part of the crossbar cable (optical), and insert it straight into the
opening. Do not hold the cable part when inserting the cable.
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2043 ･ October 2013
114
Shape and tab of crossbar cable (optical)
(1)
(1)
Description
Tab