Problems With Hardware And Workarounds - Fujitsu M10 Product Notes

Table 5-3
I/O devices in SPARC M10-4 cabinet (at initial implementation: a four-CPU) (continued)
PCI#7
PCI#8
PCI#9
PCI#10
I/O devices at PCI expansion unit side
If the PCI slot on the server to which a link card is connected is PCI#X, the following
device path is created to vvvv and u that are indicated in /pci@vvvv/pci@4/pci@0/
pci@u/****@0 that is the device path of PCI#X shown in Table 5-3.
Table 5-4
I/O device paths at PCI expansion unit side (at initial implementation: a four-CPU)
Device Device path
PCI expansion unit under PCI#X
PCI#1 /pci@vvvv/pci@4/pci@0/pci@u/pci@0/pci@0/pci@0/pci@1/pci@0/pci@0/****@0
PCI#2 /pci@vvvv/pci@4/pci@0/pci@u/pci@0/pci@0/pci@0/pci@1/pci@0/pci@1/****@0
PCI#3 /pci@vvvv/pci@4/pci@0/pci@u/pci@0/pci@0/pci@0/pci@1/pci@0/pci@8/****@0
PCI#4 /pci@vvvv/pci@4/pci@0/pci@u/pci@0/pci@0/pci@0/pci@1/pci@0/pci@10/pci@0/pci@0/****@0
PCI#5 /pci@vvvv/pci@4/pci@0/pci@u/pci@0/pci@0/pci@0/pci@1/pci@0/pci@10/pci@0/pci@1/****@0
PCI#6 /pci@vvvv/pci@4/pci@0/pci@u/pci@0/pci@0/pci@0/pci@1/pci@0/pci@10/pci@0/pci@10/****@0
PCI#7 /pci@vvvv/pci@4/pci@0/pci@u/pci@0/pci@0/pci@0/pci@1/pci@0/pci@10/pci@0/pci@11/****@0
PCI#8 /pci@vvvv/pci@4/pci@0/pci@u/pci@0/pci@0/pci@0/pci@1/pci@0/pci@11/pci@0/pci@0/****@0
PCI#9 /pci@vvvv/pci@4/pci@0/pci@u/pci@0/pci@0/pci@0/pci@1/pci@0/pci@11/pci@0/pci@1/****@0
PCI#10 /pci@vvvv/pci@4/pci@0/pci@u/pci@0/pci@0/pci@0/pci@1/pci@0/pci@11/pci@0/pci@10/****@0
PCI#11 /pci@vvvv/pci@4/pci@0/pci@u/pci@0/pci@0/pci@0/pci@1/pci@0/pci@11/pci@0/pci@11/****@0
Problems with Hardware and
Workarounds
There is no problem that has been confirmed as of this moment.
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2043 ･ October 2013
62
/pci@8300/pci@4/pci@0/pci@0/****@0
/pci@8300/pci@4/pci@0/pci@8/****@0
/pci@8700/pci@4/pci@0/pci@9/****@0
/pci@8700/pci@4/pci@0/pci@11/****@0