Notes On Firmware Update - Fujitsu M10 Product Notes

(2) Internet Explorer
There are no notes known at present.
(3) Firefox
If you use XSCF Web in a Firefox environment, the browser may prompt you to
■
save the login ID and password when you log in to the XSCF. In this case, do not
save the login ID and password. If you save the login ID and password, the saved
data may be displayed on LDAP, SMTP, and REMCS web pages.
Note - Remote Customer Support System (REMCS) is not supported on SPARC M10 systems
sold outside of Japan.
Configure either of the following settings to disable the login ID/password save
function of the browser:
■
■
Restrictions
(1) Common to browsers
There are no restrictions known at present.
(2) Internet Explorer
If you use Internet Explorer 8 in a Windows 7 environment, built-in Administrator
accounts cannot be used.
(3) Firefox
There are no restrictions known at present.

Notes on firmware update

[SPARC M10-4S]
■
If you update the firmware by executing the flashupdate(8) command or using
XSCF Web, the time for the processing depends on the number of SPARC M10-4S
cabinets or crossbar boxes that configure the system.
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2043 ･ October 2013
8
Disable the login ID/password save function across the entire browserSelect
[Tools] - [Options] - [Security] tab, and uncheck [Remember passwords for
sites] in [Passwords].
Specify an exception for ID and password savingSelect [Tools] - [Options] -
[Security] tab, and check [Remember passwords for sites] in [Passwords].
Then, click the [Never Remember Password for This Site] button in the dialog
box for ID and password saving that appears when you log in to the XSCF.
This registers the address of the XSCF in the [Exceptions] list for ID and
password saving, and the dialog box for ID and password saving does not
appear at subsequent logins to the XSCF.