Operating And Display Elements; Maintenance, Repair And Disposal; Factory Setting - IFM RM 3 Series Operating Instructions Manual

8 Operating and display elements

The LED setting indicated in the table corresponds to the factory setting and can be
changed via IO-Link�
Display
Green LED flashes (1 Hz)
Green LED on
Green LED off
Yellow LED on
Yellow LED off

9 Maintenance, repair and disposal

► Dispose of the device in accordance with the national environmental
regulations�

10 Factory setting

Parameter
ou2
DIx2
MAVG
LED mode
PST
h�Tim / SSC1�2
SSC1�1 Param� SP1
SSC1�1 Param� SP2
SSC1�1 Config� Logic
SSC1�1 Config� Mode
SSC1�2 Param� SP1
SSC1�2 Param� SP2
SSC1�2 Config� Logic
14
Communication
Device is in the communication mode
according to IO-Link specification vers� 1�1�3
Operating voltage is applied
No operating voltage applied
DI/DO ON, prevails over green LED
DI/DO OFF
Factory setting
In�D / digital input
rST
10
Communication
1000
OFF
1000
0
Low active
Single point
3000
2000
High active
User setting