Setting The Date - Seiko SPC167P1 Instructions Manual

STOPWATCH hands can be readjusted in the following order by pressing
l
A
button for 2 seconds or longer.
STOPWATCH
1-minute hand
* STOPWATCH 1-minute
hand turns a full circle.
▲
10
t
A Press for 2 seconds or longer.
* STOPWATCH 10-minute hand turns a full
t
circle.
Press repeatedly to set STOPWATCH
B
10-minute hand to the "0"
* The hand moves quickly if button B is kept
pressed.
* STOPWATCH 10-minute hand turns a full
circle passing the 100-minute marker only
during the STOPWATCH hand position ad-
justment.
t
STOPWATCH STOPWATCH
1/5-second hand 10-minute hand
* STOPWATCH 10-minute
* STOPWATCH 1/5-sec-
hand turns a full circle.
ond hand turns a full
circle.
t
After all the adjustments are completed,
CROWN
push ba c k in to normal position in
accordance with a time signal.

SETTING THE DATE

l Before setting the date, be sure to set the time.
position.
55
50
45
40
35
Date
1. Date setting should always be carried out after the time is correctly set.
2. Manual date adjustment is required on the first day after a month that has less than 31 days:
February, April, June, September and November.
3. Do not set the date during any time between 9:00 P.M. and 1:00 A.M. Date setting during this
time period may cause failure of date change on the following day.
CROWN
Pull out to first click.
t
Turn clockwise until the desired date
appears.
t
Push back in to normal position.
11