Table of Contents
Advertisement
1. When the stopwatch is or has been measuring, if the crown is pulled out to the second click, it
will automatically reset the STOPWATCH hands to " 0".
2. It is recommended that the hands be set to the time a few minutes ahead of the current time,
taking into consideration the time required to adjust the STOPWATCH hand position if necessary.
3. When setting the hour hand, be sure to check that AM/PM is correctly set. The watch is so de-
signed that the date changes once in 24 hours.
4. When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time and then
turn it back to the exact minute.
8
2. STOPWATCH HAND POSITION ADJUSTMENT
I If the STOPWATCH hands are not in the 0 position, follow the procedure below to set
them to the 0 position.
STOPWATCH
STOPWATCH
1-minute hand
1/5-second hand
A
B
STOPWATCH 10-minute
hand
A
Press for 2 seconds or longer.
* STOPWATCH 1-minute hand turns a full
circle.
t
Press repeatedly to set STOPWATCH
B
1-minute hand to the
0
position.
* The hand moves quickly if button B is
kept pressed.
t
* STOPWATCH 1-minute hand turns a full
circle passing the 10-minute marker only
during the STOPWATCH hand position
adjustment.
A
Press for 2 seconds or longer.
* STOPWATCH 1/5-second hand turns a
t
full circle.
Press repeatedly to set STOPWATCH
B
1/5-second hand to the
position.
0
* The hand moves quickly if button B is
kept pressed.
9
Advertisement
Table of Contents
