Soundcore Model Zero - Wireless Portable Home Speaker Manual

Soundcore Model Zero - Wireless Portable Home Speaker Manual

Also See for Model Zero:

Advertisement

Soundcore Model Zero - Wireless Portable Home Speaker Manual

Safety Instructions

  • Avoid dropping.
  • Do not disassemble.
  • Do not submerge in water.
  • Avoid extreme temperatures.
  • Do not use the device outdoors during thunderstorms.
  • Use original or certified cables.
  • Do not use any corrosive cleaner/oil to clean.

What's Included

What’s Included Step 1What’s Included Step 2


The adapter vary by region.

At a Glance

Overview

  1. BassUp button / BassUp indicator
  2. Volume down control
  3. Multi-function button
  4. Volume up control
  5. Bluetooth button / Bluetooth indicator
  6. Power button
  7. Power indicator
  8. 3.5mm audio input port (AUX)
  9. Power port
  10. Charging indicator

Using Your Soundcore Model Zero

Turn On / Off

Turn On / Off

ON Press and hold for more than 2 seconds.
OFF Press and hold for more than 2 seconds

Bluetooth mode

Bluetooth Mode

Enter Bluetooth Pairing Mode
Flashing Blue Bluetooth Pairing Mode
Solid Blue Connected to a device
Enter True Wireless Stereo Group Mode / Disconnect True Wireless Stereo
Double Flashing White True Wireless Stereo Group Mode
Solid White Connected to True Wireless Stereo

Pairing


With True Wireless Stereo technology, you can pair your Soundcore Model Zero with another Soundcore Model Zero to explore the best sound effects with left and right sound channels separated on both speakers.

Play / Pause
Play Next Song
Press to turn Bass Up on and off
Answer Call / End Call / Switch between a call on hold and an active call
Reject Call
End current call and answer incoming call / End current call and switch to call on hold
Switch audio source between Speaker and Phone
Put current call on hold and answer incoming call
Activate Siri / Other Voice Control Software
Volume Up / Down
Solid White (Bluetooth indicator) On a Call
Flashing Blue (Bluetooth indicator) Incoming Call


When turned on, Soundcore Model Zero will automatically connect to the last connected device if available. If not, press the Bluetooth pairing button to activate pairing mode.
To pair a different device, press the Bluetooth button to re-enter pairing mode. Then repeat the pairing steps.
Having connection problems? Remove Soundcore Model Zero from your device's Bluetooth history and ensure it's less than 3 feet away. Then try pairing again. To get the best sound quality, make sure there is a clear line of sight between the connected device and your speaker.

Multi-point play

  1. Connect the first mobile phone to your Soundcore Model Zero, press the Bluetooth button once on Soundcore Model Zero after the connection is successful.
  2. Press the Bluetooth button on Soundcore Model Zero twice to enter Bluetooth pairing mode.
  3. Connect the second mobile phone to Soundcore Model Zero. Once the second mobile phone is connected to Soundcore Model Zero, turn on the Bluetooth of the first mobile phone, then find Soundcore Model Zero in your pairing list. Click it for connection, make sure the connection is successful.

Note: Soundcore Model Zero can only play the music on one mobile phone at a time.

AUX-In mode

AUX-In Mode

*SoundLine AUX cable sold separately.


Plugging in an audio cable will automatically switch to AUX mode. When using AUX mode, control audio playback via the connected device.

Charging your Soundcore Model Zero

Charging

Slow Flashing Red (Power indicator) Low Battery
Solid Red (Power indicator) Charging
Off Fully Charged


Use the included adapter to charge your Soundcore Model Zero and make sure it is fully charged before its first use.
Disconnect your speaker from the charger when fully charged. Do not charge your speaker for extended periods.
When not in use, store your speaker in a cool place.

Specifications


Specifications are subject to change without notice.

  • Input: 15 V 3A
  • Audio output: 15 W x 2 + 15 W x 2
  • Battery capacity: max. 6700 mAh
  • Charging time: 3.0 hours
  • Play time (varies by volume level and music content): 10 hours
  • Size: 256 x 128 x 240mm
  • Weight (without packaging): 3.9 kg / 138 oz
  • Bluetooth version: V5.0
  • Bluetooth range: 20 m / 66 ft

Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

Product Number Z5180
Bluetooth Speaker / Soundcore Model Zero

For FAQs and more information, please visit: https://www.soundcore.com/
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.

Model No.: Z5180
V01

Videos

Anker SoundCore Zero vs Harman Kardon Onyx Studio 5 - Comparison Video

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Soundcore Model Zero - Wireless Portable Home Speaker Manual

Advertisement

Need help?

Need help?

Do you have a question about the Model Zero and is the answer not in the manual?

Questions and answers

Table of Contents