Soundcore Glow Faq

Module Problem/Inquiry
General What's in the box?
General What is the playback time of Glow?
General What Bluetooth version does soundcore Glow use?
General Is Glow waterproof?
General What charger should I use to charge Glow?
General How long does it take to charge Glow?
What is the function of the light between the Bluetooth
General
button and the PartyCast button?
soundcore Glow FAQ
Troubleshooting/Answer
soundcore Glow Speaker
60 cm USB-C to C Cable
Safety Card
Quick Start Guide
Note: Wall charger not included.
The playtime of Glow varies depending on how it is being used.
1. With the light and BassUp functions turned off, and the volume set at 50%, the estimated
playback time is around 18 hours.
2. With the light and BassUp functions turned on, and the volume set at 50%, the estimated
playback time is around 5 hours.
It's important to note that these playback time estimates have been determined in controlled
laboratory conditions. Actual results may vary.
Bluetooth 5.3.
Yes, soundcore Glow has an IPX7 waterproof rating, and it can float on water. It is necessary
to ensure that the waterproof cover on the back is securely fastened.
For best results, use a certified 5V/3A wall charger.
1. When turned off, the charging time of Glow is around 5.5 hours.
2. At 80% volume and with BassUp and the colorful light mode turned on, it will take around 10
hours.
This is a connection mode indicator light. When the light is blue, it indicates that Glow is
connected in Bluetooth mode; when it is white, it indicates that Glow is connected in PartyCast
mode. In PartyCast mode, there is no need to operate the host when adding a new speaker,
the secondary speaker will automatically recognize the host and connect.