Table of Contents
Advertisement
14) x8 PCIe slot (x16 physical) for customer card, to RTX6000
a) Used for cards supporting GPU Direct RDMA data transfer to RTX6000 GPU
15) SD card slot
16) Recovery button
17) Reset button
18) Main secondary compartment fan connector (there is an additional system fan inside the chassis)
19) Auxiliary fan connector for card fans
20) Power button
To access ports 13-19, remove the left-hand side cover. The process is illustrated below. Unscrew the
two Phillips screws (21 and 22) that secure the cover at the back of the machine. Next, push and slide
the cover in the direction towards the back of the machine without lifting (step 1). It should slide
about 0.5 inch, or less than 1.5 cm. Finally, you should be able to lift the cover off once it has more
than one degree of freedom and can be easily lifted upwards (step 2).
Clara AGX Developer Kit User Guide
Version 1.9 | 7
Advertisement
Table of Contents
