K&F Concept DQ201 Quick Start Manual page 45

WARM TIPS
You can adjust the sensitivity of the motion detection to solve the
following problems when using this product in the process .
• If the phone receives alarm messages too often, the camera will greatly
consume battery power. It is recommended to adjust the motion detection
sensitivity downward and set the alarm interval to turn on the alarm plan.
If it is found that the phone frequently receives alarm pictures without
moving objects, there may be sensitive heat sources within the range of
motion detection, resulting in PlR false triggering, it is recommended to
adjust the sensitivity of motion detection downward.
• If you detect someone passing in front of the camera but cannot receive
an alarm message, it is recommended to adjust the motion detection
sensitivity upwards to increase the PlR detection range.
• If you find that the alarm picture or video has a delay, or you can only
see the back of the person, it is recommended to adjust the motion
detection sensitivity upward.
• PIR sensor will be interfered by the ambient temperature, it is recom-
mended to adjust the sensitivity of motion detection upwards in hot
temperature environment and downwards in cold temperature environ-
ment.At the same time in very low temperatures, heavy clothing will
hinder the PIR sensor detection.
• Sunlight UV rays will interfere with the PlR sensor, the camera's PIR in
the case of direct exposure to strong sunlight, there is a probability that
the alarm is not sensitive and other undesirable phenomena.
• If you notice poor motion detection performance in nighttime environ-
ments, try turning off "Night Detection".
E-mail: service@kfconcept.com
44