Mounting The Camera To The Wall - K&F Concept DQ201 Quick Start Manual

5.MOUNTING THE CAMERA TO THE WALL

WARM TIPS:
In order to obtain the best product performance and avoid unneces-
sary environmental disturbances, please pay attention to the follow-
ing during the installation process:
1.Do not install the product nearly to the heat sources, such as
outdoor units of air conditioners, kitchen exhausts, etc.
2.Make sure there are no reflections within 5 feet (1.5 meters) of the
PIR sensor, otherwise it will interfere with the normal function of the
sensor.
3.Try to avoid installing the product on the side of a lively road.Fre-
quent pedestrians and vehicles will keep waking up the camera,
resulting in frequent alarm messages and extremely fast power
consumption.
4.Do not install the product very far from the router, the product
needs a good Wi-Fi signal to work properly.
Extra Tools You need needed:
Step Ladder
E-mail: service@kfconcept.com
Power Drill
34