Connect The Camera To Wi-Fi - K&F Concept DQ201 Quick Start Manual

4.4.CONNECT THE CAMERA TO Wi-Fi

30cm~100cm
Router
Smartphone
Tips:
1.To connect the camera successfully, please allow Cloudedge to
use your WLAN& Cellular Data at the first run of this App.
2.The camera only supports 2.4GHz Wi-Fi, and doesn't support
5GHz Wi-Fi.
3.Press the Power Button once to wake up the camera from sleep
mode and make sure the LED indicator flashes RED slowly.
4. Insert the Reset Pin into the Reset Hole and press for 5 seconds
to reset the camera. There is a 'Bugu' sound from the camera after a
successful reset.
30
E-mail: service@kfconcept.com