K&F Concept DQ201 Quick Start Manual page 36

Step 1：
Select the location where you need to install the camera, take the
camera and the phone to the location, and use the "Installation Guide"
in the application to diagnose the network and determine whether the
Wi-Fi signal at the location is good. It is recommended to install the
camera in a location with good Wi-Fi signal for smooth camera opera-
tion.
Step 2：
Use Power Drill and four screws. Secure the camera metal bracket to
the wall, 8-10feet off the ground (2-3m) is recommended. This height is
the maximum detection range of the camera motion sensor.Avoid
placing the camera in direct sunlight.
camera field of view
motion
detection zone
Up to 30ft(10m)
35
E-mail: service@kfconcept.com