Power Supply Cable Specifications - Cisco Nexus 7000 Series Hardware Installation And Reference Manual

Power Supply Cable Specifications

Power Inputs
Single input per
power supply
1 power supply
2 power supplies 1
3 power supplies 1
4 power supplies
15
15
Power Supply Cable Specifications
For power supply cable specifications, see the following tables:
Note
Table 26: 3-kW and 6-kW AC Power Supply Power Cords
Locale
Australia and New Zealand
Peoples Republic of China
Continental Europe
International
Israel
Japan and North America (non locking)
200-240 VAC operation
Japan and North America (locking) 200-240
VAC operation
Japan and North America 100-120 VAC
operation
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
162
Combined Mode
3,000 W
6,000 W
9,000 W
12,000 W
The Cisco Nexus 7018 switch uses up to four 6-kW power supplies, the Cisco Nexus 7010 switch uses
up to three 6-kW power supplies, and the Cisco Nexus 7009 uses up to two 6-kW power supplies.
If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a non-compatible power cord with this product may result in electrical
safety hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered
with the system.
Power Supply Input Source
Redundancy Mode Redundancy Mode
— —
3,000 W —
6,000 W —
9,000 W —
Power Cord Part Number
CAB-AC-16A-AUS
CAB-AC-16A-CH
CAB-AC-2500W-EU
CAB-AC-2500W-INT
CAB-AC-2500W-ISRL
CAB-9K16A-US1
CAB-AC-C6K-TWLK
CAB-7513AC
Technical Specifications
Full Redundancy
Mode
—
—
—
—
Cord Set Rating Power Cord
Reference
Illustration
16A, 250 VAC
16A, 250 VAC
16A, 250 VAC
16A, 250 VAC
16A, 250 VAC
16A, 250 VAC
16A, 250 VAC
16A, 250 VAC