Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 47

Installing a Cisco Nexus 7004 Chassis
same level as the top of the chassis (see
Nexus 7004 Chassis, on page
2. Fasten the frame to the chassis with three M3 x 10 mm screws (see Callout 2 in
Cable Management Frames on a Cisco Nexus 7004 Chassis, on page
in-lb (0.56 to 0.79 N.m).
3. Repeat Steps 1 and 2 to install the other cable management frame to the chassis.
DETAILED STEPS
Step 1 Align the guide pin on one of the two cable management frames to a guide-pin hole of the same size on the front-mounting
bracket that is already attached to the chassis. The top of the frame should be at the same level as the top of the chassis
(see Figure 17: Installing the Cable Management Frames on a Cisco Nexus 7004 Chassis, on page
Figure 17: Installing the Cable Management Frames on a Cisco Nexus 7004 Chassis
1 Guide pins on the cable management frame aligned to
two holes in the front-mount bracket.
Step 2
Fasten the frame to the chassis with three M3 x 10 mm screws (see Callout 2 in
Frames on a Cisco Nexus 7004 Chassis, on page
Step 3
Repeat Steps 1 and 2 to install the other cable management frame to the chassis.
Figure 17: Installing the Cable Management Frames on a Cisco
35).
2 Three M3 x 10 mm screws used to fasten the frame to the
chassis (total of six screws for two frames).
35). Tighten the screws to 5 to 7 in-lb (0.56 to 0.79 N.m).
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Installing the Cable Management Frames
Figure 17: Installing the
35). Tighten the screws to 5 to 7
35).
Figure 17: Installing the Cable Management
35