Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 23

Overview
1 Fan exhaust for the supervisor and I/O modules
2 System fan trays (2) (N7K-C7010-FAN-S) and
exhaust for the supervisor and I/O modules
3 Fabric fan trays (2) (N7K-C7010-FAN-F) and
exhaust for the fabric modules
Note
Figure 4: Standard Hardware Features on the Front and Sides of the Cisco Nexus 7010 Chassis, on page 9
and
including cables for connections to the Internet and the console. The systems that are not fully configured
with the maximum number of supervisor modules, I/O modules, fabric modules, or power supplies have blank
filler panels installed in place of the missing components to maintain the designed airflow for system cooling.
Figure 1-6 show the Cisco Nexus 7000 Series chassis as it appears when it is fully configured before
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
4 Fabric modules (up to 5) [N7K-C7010-FAB-1 or
N7K-C7010-FAB-2])
5 Power supply units (up to 3) and exhaust for the
power supply units—these modules are a
combination of the following:
• 6 kW AC power supply (N7K-AC-6.0KW)
• 7.5 kW AC power supply
(N7K-AC-7.5KW-INT [international plugs]
and N7K-AC-7.5KW-US [US plugs])
• 6 kW DC power supply (N7K-DC-6.0KW)
• Blank filler plate (replaces a missing power
supply to maintain the designed airflow)
Cisco Nexus 7010 System
11