Shock Absorber - DAAN Groups Voltz Toys DG80332 User Manual

1. SHOCK ABSORBER ASSEMBLY
Begin assembly with the car in an upside-down position. The vehicle has
built-in shock absorbers, they are located at the front and rear end of the
car. The shock absorbers are to be installed with the front and rear axle.
To install, start with the rear axle. Remove the shock bolt from the shock
absorber using the hexagonal wrench, and align the shock absorber holes
with the "U"-shaped bracket. Fix with the shock bolt using the hexagonal
wrench. Repeat the same steps with the front axle. Please note, the front
axle has the "U"-shaped bracket attached, ensuring the shock absorber is
fixed first when installing the front axle.
4