DAAN Groups Voltz Toys DG80332 User Manual page 16

3. The seat must be inserted into the back rest. Push the seat into the backrest,
then fix the seat onto the seat block with self-tapping screws.
9. ROLLBAR ASSEMBLY
Parts Required:
Left and Right support bar (A), Center bar (B), 12 MM Screw*2
(Rollbar A)
The rollbar assembly requires the installation of 3 parts. The left and right
support bar, and the center bar installed in between the support bars.
1. Install the left and right support bars onto the car body. Push firmly until
it "clicks" to secure. The support bars need to be connected with the
center roll bar. The center bar comes in a lower and upper portion that
needs to be put together.
(Rollbar B)
13