EcoFlow RIVER 2 Max Quick Start Manual page 8

12. If you accidentally drop the product into water during use, please place
it in a safe open area, and stay away from it until it is completely dry. The
dried product should not be used again, and should be properly disposed of
according to the disposal guide in the user manual. If the product catches
fire, we recommend that you use the fire extinguishers in the following order:
water or water mist, sand, fire blanket, dry powder, and finally a carbon
dioxide fire extinguisher.
13. Use a dry cloth to clean off dirt on the product ports.
14. Do Not put into the Microwave.
15. To reduce the risk of injury, close supervision is necessary when the product is
used near children.
16. Do not put fingers or hands into the product.
17. To reduce risk of damage to the electric plug and cord, pull the plug rather
than the cord when disconnecting the power pack.
18. Do not operate the power pack with a damaged cord or plug, or a damaged
output cable.
19. To reduce the risk of electric shock, unplug the power pack form the outlet
before attempting any instructed servicing.
20. Have servicing performed by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the product is
maintained.
21. Do not use a battery pack or appliance that is damaged or modified.
Damaged or modified batteries may exhibit unpredictable behavior resulting
in fire, explosion or risk of injury.
22.Users not to place the product on the floor, or at a height less than 457 mm
(18 inches) above the floor, during use in a repair facility.
23. This product is not recommended for powering medical emergency
equipment related to personal safety, including but not limited to medical
grade ventilators (hospital version CPAP: Continuous Positive Airway
Pressure), artificial lungs (ECMO, Extracorporeal Membrane Please follow your
doctor's instructions and consult with the manufacturer for restrictions on the
use of the equipment. If used for general medical equipment, please be sure
to monitor the power status to ensure that the power does not run out.
SAVE THESE INSTRUCTIONS