Administrative Window - SECURECOM UNIO4 WxG User Manual

For operation of device requires the setting of mobile network (APN) or WIFI connection!

4.2.1 Administrative window

The connected module type and version number are displayed in this area, along with control icons
and language selection.
Restarting the connected device
Control of output- the number on the icon presents the output number (OUT1 to OUT4)
Clicking on this icon will cause the status changing, i.e activation of corresponding output. The way
for the output state changing on control signal can be changed in the „ ARM mode" field. The „
Change NO/NC state" means that every control signal will change the output state. The „Negative
impulse" setting will result that on every control signal the output turns ON for one second, and
then automatically goes back to OFF state.
Open previously saved settings from file
UNIO4 WxG 7 EN