Porsche Panamera 2018 Owner's Manual page 88

C C h h a a r r g g i i n n g g
> Please see chapter "Display of the charge and
A
connection status on the vehicle charge port"
B
on page 86.
C
Information
D
– If the vehicle plug is inserted when you lock the
E
vehicle, the vehicle plug remains locked.
F
– The ignition can be switched on after the
charging process starts.
G
– If the vehicle key or operating device is turned
H
to ignition lock position 2 during the charging
process, the charging process is interrupted. If
I
the vehicle plug is not removed, charging re-
J
sumes after approx. 20 seconds.
– If the charging timer function is activated, the
K
charging timer controls when the charging
L
process starts and the charging process may
not start immediately after you insert and lock
M
the vehicle plug.
N
O
Finishing the charging process and
P
removing the vehicle plug from the
Q
vehicle charge port
R
1. Unlock the vehicle.
2. Press button C on the vehicle charge port.
S
The vehicle plug is unlocked. If a charging
T
process was started, it will be stopped.
3. Press the release button (arrow) on the vehicle
U
plug and pull the vehicle plug from the vehicle
V
charge port within approx. 20 seconds.
4. Disconnect the vehicle charging cable from the
W
power supply and store in a safe place.
X
5. Close the charge port door.
Y
Z
86
Information
– Observe the specified sequence for charging
the high-voltage battery.
– End the charging process before disconnect-
ing the vehicle cable from the electrical socket.
– Observe the safety instructions for charging
the high-voltage battery.
Display of the charge and connec-
tion status on the vehicle charge
port
The light indicator B shows the charge state of the
high-voltage battery and the light indicator on but-
ton C shows the connection status of the vehicle
plug.
B C Meaning
off off Vehicle plug not inserted or
no connection to the power
grid established.
or
Vehicle plug inserted: Ve-
hicle in idle state. To detect
the current connection and
charge status: Press the
or button on the vehicle
key.
off flash- Vehicle plug inserted and
es not locked (e.g. incorrect
voltage at vehicle plug).
B C Meaning
lights Vehicle plug inserted and
up locked. Connection to the
lights
power grid established (e.
up
g. timed charging).
lights Vehicle plug inserted and
up locked. The high-voltage
flash-
battery is being charged.
es
The lighting duration corre-
sponds to the current
charge state of the high-
voltage battery.
lights Vehicle plug inserted and
up locked. The charging proc-
lights
ess is finished.
up
lights An error occurred when
up charging the high-voltage
lights
battery.
up
If the charging process was not started:
e Check that the vehicle plug is inserted
correctly.
e Refer to the separate instructions for the Por-
sche charging equipment and instructions of
the vehicle charging cable used.
e Remove and insert the vehicle plugs again.
Using the charge timer function
When the departure timer is active, the high-volt-
age battery is fully charged at a programmed de-
parture time. The vehicle interior can also be
precooled/heated.