Table of Contents
Advertisement
Vertical intake / exhaust kit Ø 60/100.
Kit assembly (Fig. 1-16):
Remove the knockout hole plug (3) from the
casing front (2).
Install the gaskets (4) and (5) in the concentric
Couple the concentric intake / exhaust pipe (8)
with the male end (smooth) into the female end
sure that the external wall sealing plate (7) has
on the casing front (2); this will ensure proper
sealing and joining of the elements.
11
10
9
Fit the cover (9) on the casing front (10) using
the gasket (11).
Mount the casing front (10) referring to Paragr.
3.14.
8
5
3
2
1
11
Please note:
(Product code 3.023758) available only
7
from Hunt Heating and can be extended to the
Flue terminal locations must
comply with AS 5601.
6
4
Il Kit comprende:
N°1 - Guarnizione scarico (4)
N°1 - Guarnizione aspirazione (5)
N°1 - Guarnizione (6)
No. 1 - Exhaust gasket (4)
N°1 - Rosone (7)
No. 1 - Intake gasket (5)
N°1 - Terminale concentrico aspirazione/scarico Ø60/100 (8)
No. 1 - Gasket (6)
N°1 - Tappo di chiusura (9)
No. 1 - Wall sealing plate (7)
N°1 - O-ring (11)
No. 1 - Concentric intake/exhaust terminal Ø 60/100 (8)
No. 1 - Pipe closure cap (9)
No. 1 - O-ring (11)
C32
1-16
Advertisement
Table of Contents
