Subscribe to Our Youtube Channel
Related Manuals for Southern Enterprises 349100TX
Summary of Contents for Southern Enterprises 349100TX
- Page 1 HZ349100TX Shelf - Light Maple HZ349200TX Shelf - Black For assistance with assembly, contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com Assembly Instructions www.seidal.com...
- Page 2 Shelf Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. Using the incorrect hardware will cause damage.
- Page 3 Shelf Assembly Instructions Connect board (E) to board (H) with 2pcs screws (B). Tighten screw with Philips screwdriver. Repeat step for board (F) and board (G). Figure 1 Connect assembled units together with 4pcs screws (B) as shown in figure 2. Figure 2 Cover the screw holes with sticker covers (C) as shown in figure 3.
- Page 4 NOTE: NO DRILLED HOLE OR PLASTIC ANCHOR REQUIRED WHEN MOUNTING TO WOOD WALL.USE Find a desired location on the wall and SCREW ONLY. WE DO NOT SUPPLY HARDWARE FOR mark two locations for the screws. MOUNTING ON CONCRETE WALLS One screw (for each unit) must be attached directly into a wall stud.
- Page 5 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise. Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central time if you have product issues or email us at service@seidal.com. Please ask for customer service representative for issues involving damages or replacement parts.
- Page 6 CAUTION Max shelf load capacity is achieved by mounting screw into studs or cement walls. If mounting to sheet rock (cavity wall) it is advisable to mount at least 1 screw (without anchor) directly to a wall stud or studs. However do not leave either end of mounting bracket unsupported by at least one anchor.
Need help?
Do you have a question about the 349100TX and is the answer not in the manual?
Questions and answers