Table of Contents
Advertisement
Available languages
Available languages
the socket, have the socket replaced with an-
other of suitable type by professionally quali-
fied staff.
•
Only use or replace electrical supply cables for
this unit which correspond to the types indi-
cated by the manufacturer. Refer to the parts'
list for the part number and type.
•
Switching-on procedures may produce brief
voltage drops. In the case of insufficient power
source conditions, interference to other de-
vices may arise. No interruptions are to be ex-
pected in the case of power supply resistance
of less than 0,15 Ohm.
•
Never touch the mains plug with wet hands.
•
Do not run over, crush or pull the power sup-
ply cable or extension cord, otherwise it may
be damaged.
•
Protect the cable from heat, oil and sharp edg-
es.
•
Check the condition of the main filter: it must
not have holes or tears: in this case, replace it.
•
Check the integrity and readability of the tech-
nical data plate: if not, make an immediate re-
quest to the manufacturer
•
Regularly examine the power supply line for
damage such as cracking or ageing. If damage
is discovered, the line must be replaced by an
authorized service centre before any further
use.
•
Check that the vacuum cleaner hasn't been
damaged in any way
•
Never turn on the machine if it is faulty or if you
suspect it is faulty
•
Check that the switch isn't worn or damaged
•
Do not approach the suction intake of the ma-
chine with unfastened or broken garments that
could easily be sucked into the machine
•
Check that the filter is present and efficient
•
Make sure that the filters are installed correctly
and in full working order, always observing the
regulations in force in the workplace
•
Do not carry out repairs without the manufac-
turer's authorization
•
Never use gasoline, solvents or other ammable
liquids for cleaning; only proper detergents
should be used for cleaning
•
Never move the machine by pulling the power
cable or flexible hose
•
Never direct the opening of the machine or the
flexible tube towards people or animals
•
Protect the machine from the rain
•
Check that the machine is connected to a pow-
er source with the correct voltage indicated on
the registration plate
•
Make sure that the power cable has no wear or
damage. if replacing the cable, always replace it
with another of the same specifications as the
original one: cables that are not approved or of
inferior quality may overheat and cause serious
injury to the user
•
Make sure that the machine is connected to
an appropriate power source in full working
order (check the presence of a fully functional
grounding socket)
•
Never allow unauthorized personnel to use the
machine
•
Make sure that all safety devices are in full
working order before turning on the machine
•
Never cover the vacuum cleaner during use
APPLICATIONS
•
Before use, check that the unit and operating
equipment, in particular, the power supply ca-
ble and the extension cord are in the perfect
condition and are safe to operate. Do no use
this unit if not in perfect condition.
•
Never use it to vacuum explosive or combusti-
ble gases, liquids, or dusts, or undiluted acids
and solvents. Substances to avoid also include
petrol, paint thinner and fuel oil which could
form explosive fumes or mixtures in contact
with the turbulent air under vacuum. In addi-
tion, the list includes acetone and aluminium
and magnesium dusts. These substances can
also corrode the parts of the unit.
•
Do not vacuum burning or glowing objects or
open flames.
•
Do not direct the unit at people or animals.
•
Avoid use at low temperatures.
•
The appropriate safety regulations must be
observed when using the unit in dangerous
areas (such as petrol stations). It is forbidden
EN
13
Advertisement
Table of Contents
