Description Of The Hardware; Hardware Configuration Example - Renesas RL78/G13 Manual

Hide thumbs Also See for RL78/G13:

Table of Contents

RL78/G13

Description of the Hardware

4.1

The example of configuration of the hardware that is used for this application note is shown below.

Notes 1. The purpose of this circuit is only to provide the connection outline and the circuit is simplified accordingly.

When designing and implementing an actual circuit, provide proper pin treatment and make sure that the

hardware's electrical specifications are met (connect the input-only ports separately to V

resistor).

2. Connect any pins whose name begins with EV

respectively.

3. V

must be held at not lower than the reset release voltage (V

R01AN0956EJ0100 Rev. 1.00

Feb. 27, 2012

Figure 4.1

Hardware Configuration

to V

Safety Function (Frequency Detection)

For on-chip debugger

and any pins whose name begins with EV

) that is specified as LVD.

LVI

or V

via a

to V

Page 6 of 70

Table of Contents