Global Water GL400 User Manual page 9

Connect sensors to the GL400 by
threading sensor cables through
the enclosure's strain reliefs (8 on
the GL400-7-1 and 2 on the
GL400-1-1) and attaching cable
wires to the channel terminals.
GL400-7-1
Global Water ● (800)876-1172 ● www.globalw.com
Each end of the Communication Cable is identical. Connect one DB-9 fe-
male connector to your PC and the other to your Datalogger.
attach cable wires
to terminals
GL400-1-1
Introduction
Page 9