Table of Contents
Advertisement
To create a desktop shortcut, right-click the Global Logger.exe file you previously saved, select Send To
and click on Desktop (create shortcut).
Hardware Installation
General Installation Tips
The datalogger is not waterproof. It is water-resistant. This means that condensation, which can
•
build up inside the enclosure during humid conditions, should not affect the performance of the GL400.
However, if the datalogger is submerged in water, it will corrode the electronics and cause it to stop
working properly. Please ensure that the datalogger will be clear from flooding and out of direct rain-
fall.
The accuracy of the sensor readings can be affected by such adverse conditions as overpressure, lighten-
•
ing strikes, improper care/handling, and physical damage or abuse.
Do not install GL400 sensors in applications that contain solvents. Over time, many solvents can
•
deteriorate the cable and the sensing elements.
Install your GL400 so that it is easily accessible for calibration purposes. You may need to remove and
•
reinstall it in the future, so plan ahead!
*Copyright © Global Water Instrumentation, Inc. 2001
Global Water ● (800)876-1172 ● www.globalw.com
You can now access your Global Logger* software directly from the desktop.
Setup
Page 15
Advertisement
Table of Contents
