Table of Contents
Advertisement
Chapter 3
Using Global Logger Software
Hardware Connection
Connect the DB-9 female connector of the included communication cable (RS232C) to the COM 1 serial
port on your computer. If COM 1 is being used, either disconnect and/or disable the device on COM 1 or
connect to COM 2*.
Connect the DB-9 male connector
of the communication cable
(RS232C) to your GL400 COM
port.
Global Logger Startup
Double-click the Global Logger** icon on your desktop if you created a desktop shortcut during
software setup. Otherwise, access the directory in which your Global Logger.exe file is located
and double-click on the file. If you have not installed the Global Logger software or if you want
to create a desktop icon, see Global Logger Software Installation***. Note that the screen-
shots in Chapter 3: Using Global Logger Software represent those of an eight channel logger
(GL400-7-1). If you own a different model such as the GL400-1-1, Global Logger will display
differently.
* See Comm Failure, page 32.
** Copyright © Global Water Instrumentation, Inc. 2001
***See Global Logger Software Installation, pages 11 – 15
Page 18
DB-9 connector
Global Water ● (800)876-1172 ● www.globalw.com
3
Advertisement
Table of Contents
