Table of Contents
Advertisement
6.
If it is necessary to replace the display panelor any of the display assembly subcomponents:
a.
Remove the display panel screw covers (1).
The display panel screw covers are included in the Rubber Kit, spare part number
759923-001.
b.
Remove the two Phillips PM1.9×2.1 broad head screws (2) that secure the display panel to
the display assembly.
c.
Flex the inside edges of the left (1), top (2), and right sides (3) of the display panel until the
panel disengages from the display enclosure.
34
Chapter 4 Removal and replacement procedures
Advertisement
Table of Contents
