Table of Contents
Advertisement
Battery
Component
Battery, 3-cell, 32-Wh, 2.96-Ah, Li-ion (includes cable)
Before replacing the battery, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
WARNING!
replacement battery provided by HP, or a compatible battery purchased from HP.
CAUTION:
information. To prevent loss of information, save your work or shut down the computer through
Windows before removing the battery.
Remove the battery:
1.
Remove the eight Phillips PM1.9×2.8 screws (1) that secure the battery to the base enclosure.
2.
Detach the USB board cable (2) from the battery. (The USB board cable battery is attached to the
battery with double-sided adhesive.)
3.
Lift the front edge of the battery (3) until it rests at an angle.
28
Chapter 4 Removal and replacement procedures
To reduce potential safety issues, use only the battery provided with the computer, a
Removing a battery that is the sole power source for the computer can cause loss of
Keyboard/top cover on page
Spare part number
752235-005
17).
Advertisement
Table of Contents
